Informatics Consultant Posted September 24 Share Posted September 24 Hello all, I'm trying to display the max-min color for each panel without variations when I select a specific ID (panel) The max-min color should be static for each panel. Do you have an idea ? At the moment, max-min change everytime I select different IDs... Best regards Link to comment Share on other sites More sharing options...
David Boot-Olazabal Posted September 24 Share Posted September 24 (edited) Hi, You may want to try to create a specific color scheme for this and store it in the library (for reuse purposes). You do this by setting your preferred color coding to min, max and other (in my example it's median). And then save it to the library (follow the procedure as stated below for the 'Open from Library', but select 'Save As' instead). Then apply the color scheme to your visualization using the 'Colors' tab of the visualization's properties. Click the icon and select 'Open from Library' and select the one you just created: You may need to play a bit with with your exact settings for min/max values, but this may do the trick. Kind regards, David Edited September 24 by David Boot-Olazabal Link to comment Share on other sites More sharing options...
Informatics Consultant Posted September 24 Author Share Posted September 24 Hi David, Thank you for your answer but it is not the issue asked. To give you an example : 1. If all panels are shown. The first panel gives : - Max : 10 - Min : 0 2. If I select only this first panel, the min-max will change because it is calculated on itself. 3. I would like to keep this min-max calculation "itself" even if I show all panels Link to comment Share on other sites More sharing options...
David Boot-Olazabal Posted September 24 Share Posted September 24 Hi, Not sure if I understand you correctly. But you don't want the min / max values to change (and keeping the color coding intact), even though the selection dictates otherwise? If that is the case, you better set the min / max values to hard coded values. The min / max is dynamic and if you don't want that I would advise to use hard coded values instead. Kind regards, David Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now