Jump to content

Wellbore Mod (Light) for Spotfire® 1.2.2 (Spotfire 11.5 LTS+)


1 Screenshot

Summary

Representation of a wellbore in 2 dimensions

 

mod-sample.thumb.png.ee6178534f50e09e4754ae51e9029e2e.png

The Wellbore Mod is a schematic representation of a wellbore in 2 dimensions, plotting True Vertical Depth (TVD) versus Measured Depth (MD). It can be used to visualize fluid penetration into a wellbore during completion activities, and plot colored values at various measured depths.


Try this Mod

image.thumb.png.093fa2363853508ab30924adbcb9af1d.png

Spotfire® Analyst

Download this mod and follow the instructions below to open the mod in Spotfire Analyst:

  1. Open Spotfire® Analyst, and create an analysis by loading some data.
  2. Drag the downloaded .mod file into the analysis.
  3. The visualization mod is added to the analysis.
  4. To learn more about the capabilities and limitations of this visualization mod, read the user guide located in the downloaded folder.

For general information on how to use and share visualization mods, read the Spotfire documentation.


Data Requirements

The Wellbore Mod will draw a a 2D representation of a wellbore, with associated metrics. This is generally derived from survey data. If the data is plotted using measured depth, azimuth, and inclination, then the data will need to be prepared to map the trajectory as a series of rows including TVD and MD. Refer to the sample for details of what this looks like.

For detailed information on data requirements, the available settings, and an example of how to set up the list, read the mod's community article.


Help & Support

This Mod for Spotfire® is not supported by Spotfire Support.

For general questions about Mods, please post a question in the Forum for Extensions & Mods.

1.2.2 (Spotfire 11.5 LTS and later)
October 2024
Changes to previous release:

  • Added configuration to selectively disable warning icon
  • Like 1

×
×
  • Create New...