List of hotfixes for Spotfire® Server

Back to main page (Overview of hotfixes for Spotfire)

NOTE: Fixes for Spotfire Server are now provided almost exclusively as Service Packs - not as hotfixes. Service Packs can be downloaded from the Download site (TIBCO eDelivery) - https://edelivery.tibco.com

NOTE: Starting with releases from May 2018, the process for upgrading to Service Packs (such as 10.3.0 to 10.3.1) is the same as upgrading to new versions (such as 10.3.0 to 10.4.0) - for upgrade instructions, please refer to the section  'Upgrading from Spotfire 7.5 or later' in the TIBCO Spotfire^® Server manual. After upgrading to the latest Service Pack, you only need to apply any hotfixes available for that Service Pack version. Download and install the latest Service Pack from the TIBCO eDelivery Site,

NOTE: Spotfire hotfixes are cumulative - each new hotfix contains all previous hotfixes as well.

Spotfire Server 14.3.x

There are currently no hotfixes available for this version

Spotfire Server 14.2.x

There are currently no hotfixes available for this version

Spotfire Server 14.1.x

There are currently no hotfixes available for this version

Spotfire Server 14.0.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 12.5.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 12.4.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 12.3.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 12.2.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 12.1.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 12.0.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.8.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.7.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.6.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.5.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.4.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.3.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.2.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.1.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 11.0.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 10.10.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 10.9.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 10.8.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 10.7.x

There are currently no hotfixes available for this version 

TIBCO Spotfire Server 10.6.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 10.5.x

There are currently no hotfixes available for this version 

TIBCO Spotfire Server 10.4.x

There are currently no hotfixes available for this version 

TIBCO Spotfire Server 10.3.x

There are currently no hotfixes available for this version

TIBCO Spotfire Server 10.2.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_10.2.1 HF-002 for TIBCO Spotfire® Server 10.2.x (Released: May 14, 2019)

This hotfix corresponds to Service Pack version 10.2.1. If you apply this hotfix, there is no need to install Service Pack version 10.2.1.

TSS_10.2.0 HF-001 for TIBCO Spotfire® Server 10.2.x (Released: March 19, 2019)

TSS-24970 - Impossible to use the config-ntlm-auth CLI tool to create a global NTLM configuration without service account credentials specified.

TSS-24972 - The examples in the help topic for the config-ntlm-auth CLI tool does not work correctly on Windows.

TIBCO Spotfire Server 10.1.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_10.1.0 HF-001 for TIBCO Spotfire® Server 10.1.x (Released: February 15, 2019)

TSS-24091: Schedule update file fail to cache during the schedule time range, if a manual reload was triggered before few minutes of its schedules.

TSS-24759: Scheduled update requests are not sent as the previous request is not being processed due to being stuck in the thread.

TIBCO Spotfire Server 10.0.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_10.0.1 HF-003 for TIBCO Spotfire® Server 10.0.x (Released: January 16, 2019)

This hotfix corresponds to Service Pack version 10.0.1. If you apply this hotfix, there is no need to install Service Pack version 10.0.1.

TSS_10.0.0 HF-002 for TIBCO Spotfire® Server 10.0.x (Released: December 19, 2018)

TSS-24242 - Duplicate key error when fetching service Id and resource pool info (when a service gets assigned to multiple resource pool entries)

TSS-24323 - Early removal of scheduled update route so the users can be routed correctly even if the analysis unload request fails

TSS_10.0.0 HF-001 for TIBCO Spotfire® Server 10.0.x (Released: November 23, 2018)

TSS-23906 - Avoid unnecessary searches when performing LDAP synchronization using the member attribute and the filter-users-by-groups option.

TSS-23908 - Lookup of rootDSE attributes fails for LDAP servers that doesn't return the attribute names with exact casing.

TSS-23910 - Avoid unnecessary lease time of Spotfire Server database connections when executing problematic Information Services jobs.

TSS-24069 - Ignored configuration property lead to poor performance when having a large User Directory or Library and using Microsoft SQL Server.

TSS-24088 - Added index which will reduce deadlocks for library operations.

TIBCO Spotfire Server 7.14.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_7.14.0 HF-001 for TIBCO Spotfire® Server 7.14.x (Released: September 26, 2018)

TSS-23395 - The parentGroup was sometimes undefined when several calls are made simultaneously. This happened in Users and Groups app while creating a new group or selecting multiple groups or deleting groups (not seen very often).

TSS-23462 - License synchronization fails for users that are members of more than 50 groups when using Microsoft SQL Server.

TSS-23496 - The TERR service would be flagged as unavailable due to sessions not being cleared up.

TSS-23601 - The Node Manager reveals an incorrect version number through the Server header.

TSS-23655 - Using the check-external-library command would return folders which is nonsensical, for a large S3 library it would return false positives.

TSS-23656 - The library browser search result drop down may display items that are not applicable to the context

TIBCO Spotfire Server 7.13.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_7.13.0 HF-002 for TIBCO Spotfire® Server 7.13.x (Released: September 04, 2018)

TSS-22937 - Scheduled Updates jobs go to a never ending retry even if the destination is offline. This is fixed now. A new configuration option is "stop-updates-destination-unavailable" is created to enable if the old behaviour is expected. Review config-scheduled-updates-retries cli command for more help on the option.

TSS-23090 - Scheduled updates configured to fail on exhausted services are not retried when the service becomes available again.

TSS-23145 - Information Links failed if parameters of type Date were used for columns of type Datetime.

TSS-23460 - License synchronization fails for users that are members of more than 50 groups when using Microsoft SQL Server.

TSS_7.13.0 HF-001 for TIBCO Spotfire® Server 7.13.x (Released: July 12, 2018)

TSS-23111 - Library imports fail if replacing an existing analysis that contains bookmarks

TIBCO Spotfire Server 7.12.x 

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_7.12.0 HF-002 for TIBCO Spotfire® Server 7.12.x (Released: June 08, 2018)

TSS-22856 - Non-administrators cannot set library permissions

TSS_7.12.0 HF-001 for TIBCO Spotfire® Server 7.12.x (Released: April 18, 2018)

TSS-22402 - TIBCO Spotfire now validates transferred content while saving items in the Spotfire library if both client and server supports that.

TSS-22408 - TIBCO Spotfire now validates transferred content while opening items in the Spotfire library as well as transferred data when using Information Services if both client and server supports that.

TIBCO Spotfire Server 7.11.x

TIBCO Spotfire Server 7.11.11

There are currently no hotfixes available for this version

The following Service Pack version(s) have been replaced by a more recent Service Pack. Download and install the most recent Service Pack from the TIBCO eDelivery Site, before applying any hotfixes available for that Service Pack version:

TIBCO Spotfire Server 7.11.10

There are currently no hotfixes available for this version

TIBCO Spotfire Server 7.11.9

There are currently no hotfixes available for this version

TIBCO Spotfire Server 7.11.8

There are currently no hotfixes available for this version

TIBCO Spotfire Server 7.11.7

There are currently no hotfixes available for this version

TIBCO Spotfire Server 7.11.6

There are currently no hotfixes available for this version

TIBCO Spotfire Server 7.11.5

There are currently no hotfixes available for this version

TIBCO Spotfire Server 7.11.4

There are currently no hotfixes available for this version

TIBCO Spotfire Server 7.11.3 and older

TSS_7.11.3 LTS HF-018 for TIBCO Spotfire® Server 7.11.x LTS (Released: May 14, 2019)

This hotfix corresponds to Service Pack version 7.11.3. If you apply this hotfix, there is no need to install Service Pack version 7.11.3.

TSS_7.11.2 LTS HF-017 for TIBCO Spotfire® Server 7.11.x LTS (Released: April 10, 2019)

TSS-25089 - New HTTPS connections to the server may fail after generating a troubleshooting bundle

TSS_7.11.2 LTS HF-016 for TIBCO Spotfire® Server 7.11.x LTS (Released: March 19, 2019)

TSS-24970 - Impossible to use the config-ntlm-auth CLI tool to create a global NTLM configuration without service account credentials specified

TSS-24972 - The examples in the help topic for the config-ntlm-auth CLI tool does not work correctly on Windows

TSS_7.11.2 LTS HF-015 for TIBCO Spotfire® Server 7.11.x LTS (Released: February 15, 2019)

TSS-24090 - Schedule update file fail to cached during the schedule time range, if a manual reload was triggered before few minutes of its schedules.

TSS-24597 - For some configurations, NM service/instance fail to start after applying 7.11.2 LTS HF-014.

TSS_7.11.2 LTS HF-014 for TIBCO Spotfire® Server 7.11.x LTS (Released: January 23, 2019)

TSS-24613 - Web links to analyses does not work.

TSS_7.11.2 LTS HF-013 for TIBCO Spotfire® Server 7.11.x LTS (Released: January 16, 2019)

This hotfix corresponds to Service Pack version 7.11.2. If you apply this hotfix, there is no need to install Service Pack version 7.11.2.

TSS_7.11.1 LTS HF-012 for TIBCO Spotfire® Server 7.11.x LTS (Released: December 19, 2018)

TSS-24242 - Duplicate key error when fetching service Id and resource pool info (when a service gets assigned to multiple resource pool entries)

TSS-24322 - Early removal of scheduled update route so the users can be routed correctly even if the analysis unload request fails

TSS-24407 - Make it possible to configure a proxy for outgoing traffic and improve the HTTP connection configuration options for the OpenID Connect authentication method.

TSS_7.11.1 LTS HF-011 for TIBCO Spotfire® Server 7.11.x LTS (Released: November 23, 2018)

TSS-24029 - IllegalArgumentException during viewing of logs which caused a problem to access the logs

TSS-24068 - Ignored configuration property lead to poor performance when having a large User Directory or Library and using Microsoft SQL Server.

TSS-24087 - Added index which will reduce deadlocks for library operations.

TSS-24119 - Information Services fail to recognize JDBC data type Boolean as boolean

TSS_7.11.1 LTS HF-010 for TIBCO Spotfire® Server 7.11.x LTS (Released: October 24, 2018)

TSS-23654 - Using the check-external-library command would return folders which is nonsensical, for a large S3 library it would return false positives.

TSS-23905 - Avoid unnecessary LDAP searches when performing synchronization using the member attribute and the filter-users-by-groups option.

TSS-23907 - Lookup of rootDSE attributes fails for LDAP servers that doesn't return the attribute names with exact casing.

TSS-23909 - Avoid unnecessary lease time of Spotfire Server database connections when executing problematic Information Services jobs.

TSS-23932 - Sometimes scheduled updates not getting triggered after Node Manager service restart

TSS_7.11.1 LTS HF-009 for TIBCO Spotfire® Server 7.11.x LTS (Released: September 04, 2018)

TSS-22935 - Scheduled Updates jobs go to a never ending retry even if the destination is offline. This is fixed now. A new configuration option is "stop-updates-destination-unavailable" is created to enable if the old behaviour is expected. Review config-scheduled-updates-retries cli command for more help on the option.

TSS-23045 - The performance of several functions may be limited when having a large user directory.

TSS-23089 - Regression - scheduled updates configured to fail on exhausted services are not retried when the service becomes available again

TSS-23144 - Information Links failed if parameters of type Date were used for columns of type Datetime

TSS_7.11.1 LTS HF-008 for TIBCO Spotfire® Server 7.11.x LTS (Released: July 12, 2018)

TSS-23110 - Library imports fail if replacing an existing analysis that contains bookmarks.

TSS_7.11.1 LTS HF-007 for TIBCO Spotfire® Server 7.11.x LTS (Released: June 26, 2018)

This hotfix corresponds to Service Pack version 7.11.1. If you apply this hotfix, there is no need to install Service Pack version 7.11.1.

TSS_7.11.0 LTS HF-006 for TIBCO Spotfire® Server 7.11.x LTS (Released: June 08, 2018)

TSS-22513 - a defect has been resolved that caused the resource pool mapping to be lost on a node manager restart or on a service upgrade.

TSS-22515 - a defect has been resolved that prevented node manager logs from being included in the troubleshooting bundle when the node was directly selected. Download trouble shooting bundle will now have information regarding specific TSS or NM selected and metadata. Global TBS will have logs from all nodes and servers and metadata.

TSS-22724 - The database lookup of user group memberships is inefficient.

TSS-22784 - Unnecessarily high memory usage when executing Information Links with many elements.

TSS-22925 - Performance issue in network communication for certain configurations after applying HF-005.

TSS_7.11.0 LTS HF-005 for TIBCO Spotfire® Server 7.11.x LTS (Released: May 14, 2018)

TSS-22625 - Performance issue due to processing of redundant heart beats from node managers.

TSS_7.11.0 LTS HF-004 for TIBCO Spotfire® Server 7.11.x LTS (Released: April 18, 2018)

TSS-22401 - TIBCO Spotfire now validates transferred content while saving items in the Spotfire library if both client and server supports that.

TSS-22407 - TIBCO Spotfire now validates transferred content while opening items in the Spotfire library as well as transferred data when using Information Services if both client and server supports that.

TSS-22431 - Certain third-party component log entries end up in log files that are not rolled periodically.

TSS-22418 - When a user has configured the server to use a custom credentials provider with predefined credentials, the server replies that authentication is used. The client interprets this as that credentials should be provided, even though the server doesn't need them, resulting in an unnecessary credentials prompt.

TSS-22336 - Fixed potential memory leak related to failed scheduled updates info storage.

TSS-22442 - When a Service has multiple levels of rollback, now only one rollback version is kept and the rest of the old unused services are deleted.

TSS_7.11.0 LTS HF-003 for TIBCO Spotfire® Server 7.11.x LTS (Released: March 28, 2018)

TSS-22109 - Update Service option was not available after deploying an updated custom spk file with lower version than installed.

TSS-22280 - Error during upgrade when using the Web authentication method.

TSS-22279 - Introduced a configurable option (default true) to shut down the server if the Hazelcast cache instance shuts down.

TSS-22347 - Locks in Hazelcast leading to timeouts and high resource usage in conditions of higher user traffic and network latency in a cluster.

TSS_7.11.0 LTS HF-002 for TIBCO Spotfire® Server 7.11.x LTS (Released: February 19, 2018)

TSS-21845 - Now filtering out orphan embedded resources in the initial bookmark synchronization for the Web Player.

TSS-21781 - Unable to open analysis if another user matching a routing rule to one resource pool already has opened the same analysis file and default routing rule is another resource pool.

TSS-21894 - Corrected Action log parameters as they can be null during loadAnalysis WebService to trigger scheduled update.

TSS-21918 - CSRF protection cannot be disabled for the public SOAP API only.

TSS_7.11.0 LTS HF-001 for TIBCO Spotfire® Server 7.11.x LTS (Released: December 20, 2017)

TSS-21650 - Checkboxes in Monitoring and diagnostics app in Administration UI are not reset, which causes the buttons to be hidden.

TSS-21639 - Auto-Configure sometimes fails after TSS comes online to already-waiting Node Manager.

TSS-21640 - The download-troubleshooting-bundle, days-to-include setting only restrict some files.

TIBCO Spotfire Server 7.10.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_7.10.2 HF-010 for TIBCO Spotfire® Server 7.10.x (Released: January 23, 2019)

TSS-24612 - Web links to analyses does not work.

TSS_7.10.2 HF-009 for TIBCO Spotfire® Server 7.10.x (Released: January 16, 2019)

This hotfix corresponds to Service Pack version 7.10.2. If you apply this hotfix, there is no need to install Service Pack version 7.10.2.

TSS_7.10.1 HF-008 for TIBCO Spotfire® Server 7.10.x (Released: July 25, 2018)

TSS-23088 - Scheduled updates configured to fail on exhausted services are not retried when the service becomes available again

TSS-23126 - The performance of several functions may be limited when having a large user directory.

TSS_7.10.1 HF-007 for TIBCO Spotfire® Server 7.10.x (Released: July 12, 2018)

TSS-23110 - Library imports fail if replacing an existing analysis that contains bookmarks

TSS_7.10.1 HF-006 for TIBCO Spotfire® Server 7.10.x (Released: June 26, 2018)

This hotfix corresponds to Service Pack version 7.10.1. If you apply this hotfix, there is no need to install Service Pack version 7.10.1.

TSS_7.10.0 HF-005 for TIBCO Spotfire® Server 7.10.x (Released: June 08, 2018)

TSS-22724 - The database lookup of user group memberships is inefficient

TSS_7.10.0 HF-004 for TIBCO Spotfire® Server 7.10.x (Released: April 18, 2018)

TSS-22381 - When using the WebService API to trigger a scheduled update it fails if "scheduled_updates" category is enabled in Action logging.

TSS-22400 - TIBCO Spotfire now validates transferred content while saving items in the Spotfire library if both client and server supports that.

TSS-22406 - TIBCO Spotfire now validates transferred content while opening items in the Spotfire library as well as transferred data when using Information Services if both client and server supports that.

TSS-22430 - Certain third-party component log entries end up in log files that are not rolled periodically.

TSS-22417 - When a user has configured the server to use a custom credentials provider with predefined credentials, the server replies that authentication is used. The client interprets this as that credentials should be provided, even though the server doesn't need them, resulting in an unnecessary credentials prompt.

TSS-22346 - Improved usage of locks in Hazelcast, that could lead to timeouts and high resource usage in conditions of higher user traffic and network latency in a cluster.

TSS_7.10.0 HF-003 for TIBCO Spotfire® Server 7.10.x (Released: March 28, 2018)

TSS-22108 - Update Service option was not available after deploying the updated custom spk file with lower version than installed.

TSS_7.10.0 HF-002 for TIBCO Spotfire® Server 7.10.x (Released: November 30, 2017)

TSS-21416 - Certain robustness validation was not applied.

TSS-21015 - Library locked for other operations while doing a move operation with conflicts.

TSS-21055 - Using Redirect on a Column element that has a Filter or Group by clause would leave the column in a broken state.

TSS-21133 - Analysis files containing information links that were copied using version 7.10 could not be opened.

TSS-21134 - Downloading a file with bookmarks might fail in some rare cases.

TSS-21490, TSS-21485 - Optimizing the deletion of library objects on Oracle, reducing usage of cursors and risk of leaks.

TSS-21497 - Tuning the chunk size for update accessed.

TSS_7.10.0 HF-001 for TIBCO Spotfire® Server 7.10.x (Released: October 10, 2017)

TSS-20596 - A specific Scheduled updates workflow fails during importing/copying analysis.

TSS-20595 - Validating folders in Information Designer was not possible after a server restart.

TSS-20617 - Using single sign-on with NTLM towards a domain controller with disabled SMB1 settings does not work.

TIBCO Spotfire Server 7.9.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_7.9.1 HF-006 for TIBCO Spotfire® Server 7.9.x (Released: July 12, 2018)

TSS-23108 - Library imports fail if replacing an existing analysis that contains bookmarks

TSS_7.9.1 HF-005 for TIBCO Spotfire® Server 7.9.x (Released: June 26, 2018)

This hotfix corresponds to Service Pack version 7.9.1. If you apply this hotfix, there is no need to install Service Pack version 7.9.1.

TSS_7.9.0 HF-004 for TIBCO Spotfire® Server 7.9.x (Released: April 18, 2018)

TSS-22399 - TIBCO Spotfire now validates transferred content while saving items in the Spotfire library if both client and server supports that.

TSS-22405 - TIBCO Spotfire now validates transferred content while opening items in the Spotfire library as well as transferred data when using Information Services if both client and server supports that.

TSS-22429 - Certain third-party component log entries end up in log files that are not rolled periodically.

TSS-22416 - When a user has configured the server to use a custom credentials provider with predefined credentials, the server replies that authentication is used. The client interprets this as that credentials should be provided, even though the server doesn't need them, resulting in an unnecessary credentials prompt.

TSS-22345 - Improved usage of locks in Hazelcast, that could lead to timeouts and high resource usage in conditions of higher user traffic and network latency in a cluster.

TSS_7.9.0 HF-003 for TIBCO Spotfire® Server 7.9.x (Released: November 30, 2017)

TSS-21054 - Using Redirect on a Column element that has a Filter or Group by clause would leave the column in a broken state.

TSS-21489, TSS-21484 - Optimizing the deletion of library objects on Oracle, reducing usage of cursors and risk of leaks.

TSS-21496 - Tuning the chunk size for update accessed.

TSS-21014 - Library locked for other operations while doing a move operation with conflicts.

TSS_7.9.0 HF-002 for TIBCO Spotfire® Server 7.9.x (Released: October 10, 2017)

TSS-20415 - When using certain Oracle JDBC drivers, information about service Packages was not properly saved.

TSS-20590 - Validating folders in Information Designer was not possible after a server restart.

TSS-20561 - A specific Scheduled updates workflow fails during importing/copying analysis.

TSS-20616 - Using single sign-on with NTLM towards a domain controller with disabled SMB1 settings would not work.

TSS_7.9.0 HF-001 for TIBCO Spotfire® Server 7.9.x (Released: June 14, 2017)

TSS-20152 - Additional checks are made before considering a node that has missed a heartbeat as offline in the topology.

TSS-20218 - Importing library content using the option "Replace existing item" (KEEP_NEW if using the import-library-content command) should not disable any scheduled updates.

TSS-20292 - On-demand Information Links did not work for some datetime input values.

TSS-20299 - Information Link parameters with undefined data types were not usable through the API.

TSS-20365 - Information link validation error when invoked programmatically, with an error message like "Parameter 'xxx' is not defined in the Information Link".

TIBCO Spotfire Server 7.8.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_7.8.2 HF-012 for TIBCO Spotfire® Server 7.8.x (Released: July 12, 2018)

TSS-23107 - Library imports fail if replacing an existing analysis that contains bookmarks

TSS_7.8.2 HF-011 for TIBCO Spotfire® Server 7.8.x (Released: June 26, 2018)

This hotfix corresponds to Service Pack version 7.8.2. If you apply this hotfix, there is no need to install Service Pack version 7.8.2.

TSS_7.8.1 HF-010 for TIBCO Spotfire® Server 7.8.x (Released: April 18, 2018)

TSS-22398 - TIBCO Spotfire now validates transferred content while saving items in the Spotfire library if both client and server supports that.

TSS-22404 - TIBCO Spotfire now validates transferred content while opening items in the Spotfire library as well as transferred data when using Information Services if both client and server supports that.

TSS-22415 - When a user has configured the server to use a custom credentials provider with predefined credentials, the server replies that authentication is used. The client interprets this as that credentials should be provided, even though the server doesn't need them, resulting in an unnecessary credentials promt.

TSS_7.8.1 HF-009 for TIBCO Spotfire® Server 7.8.x (Released: March 28, 2018)

TSS-22344 - Locks in Hazelcast leading to timeouts and high resource usage in conditions of higher user traffic and network latency in a cluster.

TSS_7.8.1 HF-008 for TIBCO Spotfire® Server 7.8.x (Released: November 30, 2017)

TSS-20865 - Scheduled update fails, when all the instances in a resource pool are STRAINED.

TSS-21488, TSS-21483 - Optimizing the deletion of library objects on Oracle, reducing usage of cursors and risk of leaks.

TSS-21495 - Tuning the chunk size for update accessed.

TSS-21011 - Library locked for other operations while doing a move operation with conflicts.

TSS_7.8.1 HF-007 for TIBCO Spotfire® Server 7.8.x (Released: October 10, 2017)

TSS-20560 - A specific Scheduled updates workflow fails during importing/copying analysis.

TSS-20615 - Using single sign-on with NTLM towards a domain controller with disabled SMB1 settings would not work.

TSS_7.8.1 HF-006 for TIBCO Spotfire® Server 7.8.x (Released: June 14, 2017)

TSS-20101 - Additional checks are made before considering a node that has missed a heartbeat as offline in the topology.

TSS-20217 - Importing library content using the option "Replace existing item" (KEEP_NEW if using the import-library-content command) should not disable any scheduled updates.

TSS-20291 - On-demand Information Links did not work for some datetime input values.

TSS-20298 - Information Link parameters with undefined data types were not usable through the API.

TSS-20364 - Information link validation error when invoked programmatically, with an error message like "Parameter 'xxx' is not defined in the Information Link".

TSS_7.8.1 HF-005 for TIBCO Spotfire® Server 7.8.x (Released: May 15, 2017)

TSS-19816 - set-license command failed to recognize some license functions.

TSS-19921 - Due to caching in Internet Explorer an incorrect language may be presented when switching language preference if language packs are deployed.

TSS-19915 - Unnecessary failed activity "No web client instances available in selected resource pool(s)".

TSS-19917 - Unnecessary scheduled update failed activity when decreasing rule instance count.

TSS-19959 - When using multiple schedules, the server may erroneously issue a load analysis request at the end of the schedule.

TSS-19962 - Rule is never loaded after it fails to load for the first time on an exhausted instance even after the service becomes available.

TSS-20031 - Possible database lock issue in LIB_ITEMS table under heavy load.

TSS-20070 - Keep Me logged in doesn't work in Internet Explorer.

TSS_7.8.1 HF-004 for TIBCO Spotfire® Server 7.8.x (Released: May 9, 2017)

This hotfix corresponds to Service Pack version 7.8.1. 

If you apply this hotfix, there is no need to install Service Pack version 7.8.1.

TSS_7.8.0 HF-003 for TIBCO Spotfire® Server 7.8.x (Released: March 17, 2017)

TSS-19581 - The updating of the 'accessed' timestamp on library items can now be disabled for performance reasons.

TSS-19606 - The Library browser may not render properly for Internet Explorer users.

TSS-19619 - Execution of Information Link may fail with exception in log similar to: getDataBlock has thrown exception, unwinding now org.apache.cxf.interceptor.Fault ... Caused by: java.util.ConcurrentModificationException.

TSS-19776 - Virtual List View LDAP synchronization against Sun Directory Server may go into an infinite loop.

TSS-19675 - Increase column size limitations to allow more than 32 000 rules.

TSS-19678 - Index rule type to improve get rules query.

TSS_7.8.0 HF-002 for TIBCO Spotfire® Server 7.8.x (Released: February 24, 2017)

TSS-18970 - Rules with schedules with duration > 23 hours do not unload the analysis at the end of the schedule.

TSDC-3718 - The Google Analytics connector will now use the system default web browser to authenticate the user.

TSS-19359 - When TSS is under heavy load and debug logging is enabled on the Node Manager, allow for longer delays in submitting heart beats.

TSS-19308 - Performing atomic locking during Node Manager service state transitions to ensure all processes and subprocesses have had enough time to finish.

TSS-19362 - Provides a means to configure the heartbeat threshold used for ensuring nodes are online.

TSS-19424 - Averaging of monitoring measurements in the Action Log performed by all servers in collective, resulting in unnecessary database traffic.

TSS-19455 - Non-administrators cannot delete multiple library items at once, when using an Oracle database.

TSS-19305 - Unnecessary scheduled update failed activity when loaded on more instances than expected.

TSS-19368 - Unload surplus of scheduled updates for schedules that do not reload.

TSS-19365 - Added a configurable delay before scheduled updates are reevaluated on service stop.

TSS-19491 - Added a configurable option to not send scheduled updates to exhausted services.

TSS_7.8.0 HF-001 for TIBCO Spotfire® Server 7.8.x (Released: January 25, 2017)

TSS-19042 - UpdateAnalysisService WSDL is incorrect.

TSS-19148 - Due to caching in web browsers or intermediate proxies login may fail when using the JavaScript API and NTLM/Kerberos authentication.

TSS-19251 - Data Source connection initialization scripts may fail when not containing a SELECT statement.

TIBCO Spotfire Server 7.7.x

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_7.7.1 HF-011 for TIBCO Spotfire® Server 7.7.x (Released: March 28, 2018)

TSS-22090 - Improved performance related to checking library permissions and other functionality based on group memberships.

TSS-22343 - Locks in Hazelcast leading to timeouts and high resource usage in conditions of higher user traffic and network latency in a cluster.

TSS_7.7.1 HF-010 for TIBCO Spotfire® Server 7.7.x (Released: November 30, 2017)

TSS-21480 - If there is a rule to modify the Accept header value to */* in all requests, then the TSS should handle that request (and be able to open the Library Browser).

TSS-20864 - Scheduled update fails, when all the instances in a resource pool are STRAINED.

TSS-21487, TSS-21482 - Optimizing the deletion of library ojbects on Oracle, reducing usage of cursors and risk for leaks.

TSS-21494 - Tuning the chunk size for update accessed.

TSS_7.7.1 HF-009 for TIBCO Spotfire® Server 7.7.x (Released: November 15, 2017)

TSS-21010 - Library locked for other operations while doing a move operation with conflicts.

TSS_7.7.1 HF-008 for TIBCO Spotfire® Server 7.7.x (Released: October 10, 2017)

TSS-20559 - A specific Scheduled updates workflow fails during importing/copying analysis.

TSS-20614 - Using single sign-on with NTLM towards a domain controller with disabled SMB1 settings would not work.

TSS_7.7.1 HF-007 for TIBCO Spotfire® Server 7.7.x (Released: June 14, 2017)

TSS-20216 - Importing library content using the option "Replace existing item" (KEEP_NEW if using the import-library-content command) should not disable any scheduled updates.

TSS-20290 - On-demand Information Links did not work for some datetime input values.

TSS-20297 - Information Link parameters with undefined data types were not usable through the API.

TSS-20363 - Information link validation error when invoked programmatically, with an error message like "Parameter 'xxx' is not defined in the Information Link".

TSS_7.7.1 HF-006 for TIBCO Spotfire® Server 7.7.x (Released: May 15, 2017)

TSS-19815 - set-license command failed to recognize some license functions.

TSS-19920 - Due to caching in Internet Explorer an incorrect language may be presented when switching language preference if language packs are deployed.

TSS-19916 - Unnecessary scheduled update failed activity when decreasing rule instance count.

TSS-19914 - Unnecessary failed activity "No web client instances available in selected resource pool(s)".

TSS-19958 - When using multiple schedules, the server may erroneously issue a load analysis request at the end of the schedule.

TSS-19961 - Rule is never loaded after it fails to load for the first time on an exhausted instance even after the service becomes available.

TSS-20030 - Possible database locks issue in LIB_ITEMS table under heavy load.

TSS-20069 - Keep Me logged in doesn't work in Internet Explorer.

TSS_7.7.1 HF-005 for TIBCO Spotfire® Server 7.7.x (Released: May 9, 2017)

This hotfix corresponds to Service Pack version 7.7.1. 

If you apply this hotfix, there is no need to install Service Pack version 7.7.1.

TSS_7.7.0 HF-004 for TIBCO Spotfire® Server 7.7.x (Released: March 17, 2017)

TSS-19580 - The updating of the 'accessed' timestamp on library items can now be disabled for performance reasons.

TSS-19618 - Execution of Information Link may fail with exception in log similar to: getDataBlock has thrown exception, unwinding now org.apache.cxf.interceptor.Fault ... Caused by: java.util.ConcurrentModificationException.

TSS-19674 - Increase column size limitations to allow more than 32 000 rules.

TSS-19775 - Virtual List View LDAP synchronization against Sun Directory Server may go into an infinite loop.

TSS_7.7.0 HF-003 for TIBCO Spotfire® Server 7.7.x (Released: February 24, 2017)

TSS-19358 - When TSS is under heavy load and debug logging is enabled on the Node Manager, allow for longer delays in submitting heart beats.

TSS-19309 - Performing atomic locking during Node Manager service state transitions to ensure all processes and subprocesses have had enough time to finish.

TSS-19361 - Provides a means to configure the heartbeat threshold used for ensuring nodes are online.

TSS-19426 - Averaging of monitoring measurements in the Action Log performed by all servers in collective, resulting in unnecessary database traffic.

TSS-19454 - Non-administrators cannot delete multiple library items at once, when using an Oracle database.

TSS-19306 - Unnecessary scheduled update failed activity when loaded on more instances than expected.

TSS-19323 - Schedules with small gaps don't work as in old topology.

TSS-19367 - Unload surplus of scheduled updates even for schedules which do not reload.

TSS-19364 - Add a configurable delay before scheduled updates are reevaluated on service start/stop.

TSS-19490 - Added a config option to not send scheduled updates to exhausted services.

TSS_7.7.0 HF-002 for TIBCO Spotfire® Server 7.7.x (Released: January 25, 2017)

TSS-19147 - Due to caching in web browsers or intermediate proxies login may fail when using the JavaScript API and NTLM/Kerberos authentication

TSS_7.7.0 HF-001 for TIBCO Spotfire® Server 7.7.x (Released: December 16, 2016)

TSS-18398 - Even if a TSS appears as unreachable to itself, it should not mark itself as offline during inspection of reachability via its APIs

TSS-18480 - Scheduled Updates rules are reloaded when the connectivity between Spotfire Server and a node is restored following a temporary network issue

TSS-18540 - Users cannot log in when selecting "keep me logged" in when using the "collapse domains" option

TSS-18458 - Hotfix tool is missing the resource files containing the text strings.

TSS-18549 - The LDAP read and connection timeout settings may now be individually updated

TSS-18555 - A named service configuration with a new version number may be applied to a service that was previously configured for the name service configuration

TSS-18585 - Requests to a Spotfire Server configured for NTLM authentication may fail during long sessions when using Internet Explorer

TSS-18677 - A server may fail to start when having more than one Spotfire Server with more than one network interface and using Hazelcast

TSS-18682 - Due to caching in Internet Explorer a user may not be able to logout from an analysis a second time.

TSS-18700 - External Authentication fails when using Authentication Filter as "source"

TSS-18753 - Cache the results of the badge providers for a short duration to increase performance of checks

TSS-18755 - Possible deadlock when starting TSS using SQL server as primary database, deadlocks related to service attributes on MSSQL server

TSS-18836 - In some situations optimizations are not applied for newer versions a Web Player service

TSS-19041 - WSDL incorrect for the UpdateAnalysisService SOAP web service used to submit event-based scheduled updates

TSS-18506 - When a scheduled update is loaded on too many instances (due to connectivity issues, or if the instance count is decreased in the rule), the analysis are not unloaded on the surplus instances

TSS-18861 - A new CLI command to list-services

TSS-18877 - Fixed the UI for create/edit rule in Scheduled Updates for small screen resolution. Should see a scroll bar for small screen now.

TSS-18968 - Analysis on Scheduled Updates with small time gaps not unloaded as expected (behavior differ from before version 7.5)

TIBCO Spotfire Server 7.6.x 

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)  

TSS_7.6.1 HF-014 for TIBCO Spotfire® Server 7.6.x (Released: November 30, 2017)

TSS-20863 - Scheduled update fails, when all the instances in a resource pool are STRAINED.

TSS-21486, TSS-21481 - Optimizing the deletion of library objects on Oracle, reducing usage of cursors and risk for leaks.

TSS-21493 - Tuning the chunk size for update accessed.

TSS_7.6.1 HF-013 for TIBCO Spotfire® Server 7.6.x (Released: October 10, 2017)

TSS-20340 - Unnecessary failed activity "No web client instances available in selected resource pool(s)".

TSS-20558 - A specific Scheduled updates workflow fails during importing/copying analysis.

TSS-20618 - Using single sign-on with NTLM towards a domain controller with disabled SMB1 settings would not work.

TSS_7.6.1 HF-012 for TIBCO Spotfire® Server 7.6.x (Released: June 14, 2017)

TSS-20215 - Importing library content using the option "Replace existing item" (KEEP_NEW if using the import-library-content command) should not disable any scheduled updates.

TSS-20289 - On-demand Information Links did not work for some datetime input values.

TSS-20296 - Information Link parameters with undefined data types were not usable through the API.

TSS-20362 - Information link validation error when invoked programmatically, with an error message like "Parameter 'xxx' is not defined in the Information Link".

TSS_7.6.1 HF-011 for TIBCO Spotfire® Server 7.6.x (Released: May 15, 2017)

TSS-19918 - Due to caching in Internet Explorer an incorrect language may be presented when switching language preference if language packs are deployed.

TSS-19957 - The server may sometimes issue unload requests twice when multiple schedules are used (even if the schedules are configured to run on different days of the week).

TSS-20008 - When users open files which are loaded by scheduled updates the internal routes may be overwritten, causing scheduled updates to trigger unnecessary updates and also users to be routed incorrectly.

TSS-19960 - Rule is never loaded after it fails to load for the first time on an exhausted instance even after it becomes available.

TSS-20029 - Possible database locks issue in LIB_ITEMS table under heavy load.

TSS-20068 - Keep Me logged in doesn't work in Internet Explorer.

TSS_7.6.1 HF-010 for TIBCO Spotfire® Server 7.6.x (Released: May 9, 2017)

This hotfix corresponds to Service Pack version 7.6.1. 

If you apply this hotfix, there is no need to install Service Pack version 7.6.1.

TSS_7.6.0 HF-009 for TIBCO Spotfire® Server 7.6.x (Released: March 17, 2017)

TSS-19579 - The updating of the 'accessed' timestamp on library items can now be disabled for performance reasons

TSS-19617 - Executon of Information Link may fail with exception in log similar to: getDataBlock has thrown exception, unwinding now org.apache.cxf.interceptor.Fault ... Caused by: java.util.ConcurrentModificationException

TSS-19673 - Increased column size limitations to allow more than 32 000 routing rules.

TSS_7.6.0 HF-008 for TIBCO Spotfire® Server 7.6.x (Released: February 24, 2017)

TSS-19316: Hotfix 7.6: Add a null check to the services tab to prevent an error toaster for nodes saying "alias" is null

TSS-19283 - When TSS is under heavy load and debug logging is enabled on the Node Manager, allow for longer delays in submitting heart beats

TSS-19360 - Provides a means to configure the heartbeat threshold used for ensuring nodes are online

TSS-19310 - Performing atomic locking during Node Manager service state transitions to ensure all processes and subprocesses have had enough time to finish

TSS-19307 - Eliminated unnecessary failed scheduled update activity generated due to too many instances loaded

TSS-19366 - Unload surplus of scheduled updates at schedule start time for schedules that do not reload

TSS-19427 - Averaging of monitoring measurements in the Action Log performed by all servers in collective, resulting in unnecessary database traffic.

TSS-19453 - Non-administrators cannot delete multiple library items at once, when using an Oracle database

TSS-19363 - Unstable services (that temporarily cannot communicate with TSS) may cause too many copies of scheduled updates loaded on the WebPlayers

TSS-19489 - New configuration option to not send scheduled updates to exhausted services

TSS_7.6.0 HF-007 for TIBCO Spotfire® Server 7.6.x (Released: January 25, 2016)

TSWP-11378 - Improved hotfix manifest and modified logging for observation of events related to managing services.

TSS-19146 - Due to caching in web browsers or intermediate proxies login may fail when using the JavaScript API and NTLM/Kerberos authentication

TSS_7.6.0 HF-006 for TIBCO Spotfire® Server 7.6.x (Released: December 16, 2016)

TSS-18676 - A server may fail to start when having more than one Spotfire Server with more than one network interface and using Hazelcast

TSS-18681 - Due to caching in Internet Explorer a user may not be able to logout from an analysis a second time.

TSS-18752 - Cache the results of the badge providers for a short duration to increase performance of checks

TSS-18754 - Possible deadlock when starting TSS using SQL server as primary database, deadlocks related to service attributes on MSSQL server

TSS-18936 - Create or Edit Rule dialog in Scheduled Updates issue on low screen resolution.

TSS-18967 - Analysis on Scheduled Updates with small time gaps not unloaded as expected (behavior differ from before version 7.5)

TSS_7.6.0 HF-005 for TIBCO Spotfire® Server 7.6.x (Released: October 28, 2016)

TSS-18479 - Scheduled Updates rules are reloaded when the connectivity between Spotfire Server and a node is restored following a temporary network issue.

TSS-18539 - Users cannot log in when selecting "keep me logged in" when using the "collapse domains" option.

TSS-18548 - The LDAP read and connection timeout settings can now be individually updated.

TSS-18554 - A named service configuration with a new version number may be applied to a service that was previously configured for the name service configuration.

TSS-18586 - Requests to a Spotfire Server configured for NTLM authentication may fail during long sessions when using Internet Explorer.

TSS-18599 - A user can not enable a rule with an analysis having the same name but a different GUID, that is disabled due the removal of analysis from library.

TSS-18505 - Scheduled update rule's manual reloading details are not available once rule fails.

TSS_7.6.0 HF-004 for TIBCO Spotfire® Server 7.6.x (Released: October 10, 2016)

TSS-18095 - Scheduled updates reload unnecessarily on server restart in a cluster.

TSS-18208 - Database upgrade hotfix script fails on case sensitive databases.

TSS-18209 - Additional checks introduced to confirm service status during network instability.

TSS-18267 - Last update time calculation for scheduled update is sometimes wrong.

TSS-18271 - A forced LDAP synch does not stop if the error "Sizelimit Exceeded" is returned from the LDAP server.

TSS-18310 - A rule with multiple schedules with no reload does not execute as expected.

TSS-18369 - Usernames cannot exceed 50 characters.

TSS-18392 - Even if a Spotfire Server appears as unreachable to itself, it should not mark itself as offline during inspection of reachability via its APIs.

TSS_7.6.0 HF-003 for TIBCO Spotfire® Server 7.6.x (Released: September 16, 2016)

TSS-17947 - The update-ldap-config and create-ldap-config commands now have options to set the read-timeout and connection-timeout values.

TSS-18168 - Enhanced service monitoring to quickly detect any unreachable services.

TSS_7.6.0 HF-002 for TIBCO Spotfire® Server 7.6.x (Released: August 18, 2016)

TSS-17858 - Cross domain Kerberos constrained delegation does not work.

TSS-17889 - Automation Services may get many "Failed to process life cycle event" exceptions.

TSS-17905 - Web Player user is unable to view reports even if the group to which the user belongs to has all the necessary licences enabled.

TSS-18041 - Data retrieval via Information Link may hang with excessive logging if data source is temporarily unavailable.

TSS-18034 - Data retrieval via Information Link returning many rows of data may fail with exception similar to "Unresolved job id".

TSS-18044 - Nodes/Services tab is empty while migrating and throws error "installedService is null" or "Cannot read property baseServiceConfig of null".

TSS_7.6.0 HF-001 for TIBCO Spotfire® Server 7.6.x (Released: July 07, 2016)

TSS-17553 - Node Managers may not be aware of an offline TSS under some circumstances.

TSS-17568 - The diagnostics table "Analyses and Diagnostics" in Monitoring & Diagnostics -> Services is not readable at times, the columns are written over each other.

TSS-17616 - When using a database with high resolution timestamps the server keeps downloading new deployments every 5 minutes until restart.

TSS-17676 - Kerberos with constrained delegation does not work from a TSS to a Web Player.

TSS-17714 - NullPointerException causes service listing to be empty in Nodes & Services app.

TSS-17716 - Service installation failure may be masked with a NullPointerException instead of an actionable error.

TSS-17705 - When an LDAP search results in a temporary failure, the search method returns an empty result set with an extra 8 second delay instead of immediately propagating the exception.

TSS-17640 - Addressing some cases where data retrieval via Information Services fail without retry.

TSS-17735 - Hard limit of 10,000 routing rules needs to raised.

TIBCO Spotfire Server 7.5.x 

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)

TSS_7.5.1 HF-011 for TIBCO Spotfire® Server 7.5.x (Released: June 14, 2017)

TSS-20288 - On-demand Information Links did not work for some datetime input values.

TSS-20295 - Information Link parameters with undefined data types were not usable through the API.

TSS-20361 - Information link validation error when invoked programmatically, with an error message like "Parameter 'xxx' is not defined in the Information Link".

TSS_7.5.1 HF-010 for TIBCO Spotfire® Server 7.5.x (Released: May 9, 2017)

This hotfix corresponds to Service Pack version 7.5.1. 

If you apply this hotfix, there is no need to install Service Pack version 7.5.1.

TSS_7.5.0 HF-009 for TIBCO Spotfire® Server 7.5.x (Released: December 16, 2016)

TSS-18680 - Due to caching in Internet Explorer a user may not be able to logout from an analysis a second time.

TSS-18966 - Analysis on Scheduled Updates with small time gaps not unloaded as expected (behavior differ from before version 7.5)

TSS_7.5.0 HF-008 for TIBCO Spotfire® Server 7.5.x (Released: October 28, 2016)

TSS-18538 - Users cannot log in when selecting "keep me logged in" when using the "collapse domains" option.

TSS-18547 - The LDAP read and connection timeout settings may now be individually updated.

TSS-18584 - Requests to a Spotfire Server configured for NTLM authentication may fail during long sessions when using Internet Explorer.

TSS_7.5.0 HF-007 for TIBCO Spotfire® Server 7.5.x (Released: October 10, 2016)

TSS-18270 - A forced LDAP synch does not stop if the error "Sizelimit Exceeded" is returned from the LDAP server.

TSS-18266 - Last update time calculation for scheduled update is sometimes wrong.

TSS-18268 - Scheduled updates reload unnecessarily on server restart in a cluster.

TSS-18207 - Database upgrade hotfix script fails on case sensitive databases.

TSS-18309 - A rule with multiple schedules with no reload does not execute as expected.

TSS-18391 - Even if a Spotfire Server appears as unreachable to itself, it should not mark itself as offline during inspection of reachability via its APIs.

TSS_7.5.0 HF-006 for TIBCO Spotfire® Server 7.5.x (Released: September 16, 2016)

TSS-17946 - The update-ldap-config and create-ldap-config commands now have options to set the read-timeout and connection-timeout values.

TSS-18167 - Enhanced service monitoring to quickly detect any unreachable services.

TSS_7.5.0 HF-005 for TIBCO Spotfire® Server 7.5.x (Released: August 18, 2016)

TSS-17859 - Cross domain Kerberos constrained delegation does not work.

TSS-17906 - Web Player user is unable to view reports even if the group to which the user belongs to has all the necessary licences enabled.

TSS-18040 - Data retrieval via Information Link may hang with excessive logging if data source is temporarily unavailable.

TSS-18033 - Data retrieval via Information Link returning many rows of data may fail with exception similar to "Unresolved job id".

TSS_7.5.0 HF-004 for TIBCO Spotfire® Server 7.5.x (Released: July 07, 2016)

TSS-17615 - When using a database with high resolution timestamps the server keeps downloading new deployments every 5 minutes until restart.

TSS-17675 - Kerberos with constrained delegation does not work from a TSS to a Web Player.

TSS-17713 - NullPointerException causes service listing to be empty in Nodes & Services app.

TSS-17715 - Service installation failure may be masked with a NullPointerException instead of an actionable error.

TSS-17706 - When an LDAP search results in a temporary failure, the search method returns an empty result set with an extra 8 second delay instead of immediately propagating the exception.

TSS-17639 - Addressing some cases where data retrieval via Information Services fail without retry.

TSS-17675 - Issue using some Connectors using Constrained Delegation

TSS-17734 - Hard limit of 10,000 routing rules needs to raised.

TSS_7.5.0 HF-003 for TIBCO Spotfire® Server 7.5.x (Released: May 31, 2016)

TSS-17390 - Imported schedules from 7.0 earlier, may end up with an empty time zone. This will not be visible in the UI, however if it happens, scheduled updates using those schedules will not run and the server.log will show a "java.time.DateTimeException".

TSS-17460 - Users that are members of the same group in multiple ways cannot delete library items.

TSS-17500 - Error message displayed in analysis and "java.lang.IllegalStateException: Connection is still allocated" gets logged in server.log at every hour on a setup configured with Kerberos authentication.

TSS_7.5.0 HF-002 for TIBCO Spotfire® Server 7.5.x (Released: April 28, 2016)

TS-44660 - Null is not sent for stored procedure parameters when using on-demand.

TSS-17160 - Routing rules/scheduled updates are removed during library import using the replace option.

TSS_7.5.0 HF-001 for TIBCO Spotfire® Server 7.5.x (Released: March 30, 2016)

TSS-16768 - Delegated Kerberos can stop working for user sessions that are open for longer than the Kerberos ticket timeout.

TSS-16775 - Node Manager logs includes incorrect version for some third party components.

TSS-16946 - High CPU and database transaction locking can occur on TIBCO Spotfire Server.

TSS-16947 - Service upgrade is not available when modules, such as cobranding, etc, are removed from the deployment area

TSS-16929 - Information Elements are not visible in Information Designer when certain permissions settings are set in the library.

TSS-16839 - An analysis under scheduled updates might not be loaded after a Web Player instance restart when running in a clustered environment.

TSS-16774 - External update keep alive value depends on rule status and not rule schedule.

TSS-16905 - Schedule rule will not trigger after service restart if the same analysis is also opened in a web browser.

TSS-16992 - External updates does not use the instance count configured in the routing rule for the same analysis, if such a rule exists and is enabled.

TIBCO Spotfire Server 7.0.x 

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)

TSS_7.0.2 HF-013 for TIBCO Spotfire® Server 7.0.x (Released: June 14, 2017)

TSS-20287 - On-demand Information Links did not work for some datetime input values.

TSS-20294 - Information Link parameters with undefined data types were not usable through the API.

TSS-20360 - Information link validation error when invoked programmatically, with an error message like "Parameter 'xxx' is not defined in the Information Link".

TSS_7.0.2 HF-012 for TIBCO Spotfire® Server 7.0.x (Released: May 9, 2017)

This hotfix corresponds to Service Pack version 7.0.2. 

If you apply this hotfix, there is no need to install Service Pack version 7.0.2.

TSS_7.0.1 HF-011 for TIBCO Spotfire® Server 7.0.x (Released: October 28, 2016)

TSS-18546 - The LDAP read and connection timeout settings may now be individually updated.

TSS-18583 - Requests to a Spotfire Server configured for NTLM authentication may fail during long sessions when using Internet Explorer.

TSS_7.0.1 HF-010 for TIBCO Spotfire® Server 7.0.x (Released: October 11, 2016)

TSS-18269 - A forced LDAP sync does not stop if the error "Sizelimit Exceeded" is returned from the LDAP server.

TSS_7.0.1 HF-009 for TIBCO Spotfire® Server 7.0.x (Released: September 16, 2016)

TSS-18020 - The update-ldap-config and create-ldap-config commands now have options to set the read-timeout and connection-timeout values.

TSS-18094 - Concurrent requests in the same session may fail with IllegalStateException in the log.

TSS_7.0.1 HF-008 for TIBCO Spotfire® Server 7.0.x (Released: August 18, 2016)

TSS-17878 - The Config Tool writes the encryption password in the wrong place in bootstrap.xml, with the effect that it is never used.

TSS-17944 - The getProperties Webservice API does not return the custom properties set using setProperties. The properties of the library Item are not exposed.

TSS-17963 - Import can fail in some cases if a user who used to have bookmarks for an analysis no longer have permissions to view it.

TSS-18039 - Data retrieval via Information Link may hang with excessive logging if data source is temporarily unavailable.

TSS-18032 - Data retrieval via Information Link returning many rows of data may fail with exception similar to "Unresolved job id".

TSS_7.0.1 HF-007 for TIBCO Spotfire® Server 7.0.x (Released: July 7, 2016)

TSS-17707 - LDAP synchronization never terminates when experiencing temporary communication errors with the LDAP server.

TSS-17722 - When an LDAP search results in a temporary failure, the search method returns an empty result set with an extra 8 secon delay instead of immediately propagating the exception

TSS-17638 - Addressing some cases where data retrieval via Information Services fail without retry.

TSS_7.0.1 HF-006 for TIBCO Spotfire® Server 7.0.x (Released: April 28, 2016)

TS-44659 - Null is not sent for stored procedure parameters when using on-demand.

TSS-17292 - Incorrect filename when downloading a file from the library.

TSS_7.0.1 HF-005 for TIBCO Spotfire® Server 7.0.x (Released: February 3, 2016)

TSS-16232 - commons-logging.jar and common-codec.jar that httpclient.jar depend on, is not of correct version.

TSS-16230 - Weekly LDAP synchronization schedule shows wrong values in cron scheduler: the cron schedule tool of the Configuration UI's LDAP panel has the weekdays off by one day. A schedule set to sync every sunday will synch every monday, and so on.

TSS-16292 - On-demand data using more than 10000 input values (7000 for Oracle data source) may fail with exception in log similar to "The multi-part identifier ... could not be bound."

TSS_7.0.1 HF-004 for TIBCO Spotfire® Server 7.0.x (Released: December 17, 2015)

TSS-15466 - LDAP connections are not properly closed after synchronization.

TSS-14567 - Incorrect geocoding causes some countries in map charts to display markers outside their borders (Note: This needs additional configuration as described below).

TSS-15756 - LDAP users are able to temporarily login until next LDAP synchronization task is completed, even though the "Filter users by groups" option is enabled and they are not members of any synchronized LDAP groups.

TSS-16271 - Map Chart Auto-zoom of United State of America does not center properly.

TSS_7.0.1 HF-003 for TIBCO Spotfire® Server 7.0.x (Released: October 27, 2015)

This hotfix corresponds to Service Pack version 7.0.1, which mainly relates to upgrading the Tomcat version of the TIBCO Spotfire Server. 

If you apply this hotfix, there is no need to install Service Pack version 7.0.1.

TSS_7.0.0 HF-002 for TIBCO Spotfire® Server 7.0.x (Released: July 8, 2015)

TSS-13386 - The logging of LDAP connections does not include the exact LDAP server connected to.

TSS-13784 - Runtime exception when simultaneously opening 2 information links using the same MSSQL delegated kerberos data source.

TSS-13907 - TIBCO Spotfire server uses the hexadecimal values of a certificates DN when using anything else than CN as username.

TSS_7.0.0 HF-001 for TIBCO Spotfire® Server 7.0.x (Released: April 24, 2015)

TSS-12816 - Information Links may fail for JDBC data source not supporting JDBC method Connection.setReadOnly().

TSS-12969 - Information Links based on SAS data source may fail if more than 10000 values are passed as prompt (or via on-demand).

TSS-12742 - When the server shuts down the action logging db logged (to the server log) that it was shutting down on ERROR level, this has been lowered to INFO level.

TSS-12965 - After an library import with conflict resolution set to KEEP_NEW, private bookmarks that exist prior to import is not visible if import contains private bookmarks on same analysis.

TS-40694 - Not possible to create inner or outer join in Information Services with join criteria based on more than one column per table.

TIBCO Spotfire Server 6.5.x 

DOWNLOAD LATEST HOTFIX (Note: for this download link to work, you must be logged in to the TIBCO Support Portal)

TSS_6.5.4 HF-017 for TIBCO Spotfire® Server 6.5.x (Released: October 28, 2016)

TSS-18545 - The LDAP read and connection timeout settings may now be individually updated.

TSS-18582 - Requests to a Spotfire Server configured for NTLM authentication may fail during long sessions when using Internet Explorer.

TSS_6.5.4 HF-016 for TIBCO Spotfire® Server 6.5.x (Released: October 10, 2016)

TSS-18272 - A forced LDAP sync does not stop if the error "Sizelimit Exceeded" is returned from the LDAP server.

TSS_6.5.4 HF-015 for TIBCO Spotfire® Server 6.5.x (Released: September 16, 2016)

TSS-17945 - The update-ldap-config and create-ldap-config commands now have options to set the read-timeout and connection-timeout values.

TSS-18130 - Concurrent requests in the same session may fail with IllegalStateException in the log.

TSS_6.5.4 HF-014 for TIBCO Spotfire® Server 6.5.x (Released: August 18, 2016)

TSS-17788 - Concurrent server requests sometimes fail when using NTLM and Spotfire Analyst or Internet Explorer.

TSS-17960 - Import can fail in some cases if a user who used to have bookmarks for an analysis no longer have permissions to view it.

TSS-18038 - Data retrieval via Information Link may hang with excessive logging if data source is temporarily unavailable.

TSS-18031 - Data retrieval via Information Link returning many rows of data may fail with exception similar to "Unresolved job id".

TSS_6.5.4 HF-013 for TIBCO Spotfire® Server 6.5.x (Released: July 7, 2016)

TSS-17708 - LDAP synchronization never terminates when experiencing temporary communication errors with the LDAP server.

TSS-17723 - When an LDAP search results in a temporary failure, the search method returns an empty result set with an extra 8 second delay instead of immediately propagating the exception.

TSS-17637 - Addressing some cases where data retrieval via Information Services fail without retry.

TSS_6.5.4 HF-012 for TIBCO Spotfire® Server 6.5.x (Released: April 28, 2016)

TS-44658 - Null is not sent for stored procedure parameters when using on-demand.

TSS-17291 - Incorrect filename when downloading a file from the library.

TSS_6.5.4 HF-011 for TIBCO Spotfire® Server 6.5.x (Released: February 3, 2016)

TSS-16231 - common-logging.jar that httpclient.jar depend on is not of correct version. Apache HTTP Client is dependent upon commons-logging 1.2 and common-codec 1.9 which now have been updated to the correct version.

TSS-16291 - On-demand data using more than 10000 input values (7000 for Oracle data source) may fail with exception in log similar to "The multi-part identifier ... could not be bound."

TSS_6.5.4 HF-010 for TIBCO Spotfire® Server 6.5.x (Released: December 17, 2015)

TSS-15467: LDAP connections are not properly closed after synchronization.

TSS-15755: LDAP users are able to temporarily login until next LDAP synchronization task is completed, even though the "Filter users by groups" option is enabled and they are not members of any synchronized LDAP groups.

TSS_6.5.4 HF-009 for TIBCO Spotfire® Server 6.5.x (Released: October 27, 2015)

This hotfix corresponds to Service Pack version 6.5.4, which mainly relates to upgrading the Tomcat version of the TIBCO Spotfire Server. 

If you apply this hotfix, there is no need to install Service Pack version 6.5.4.

TSS_6.5.3 HF-008 for TIBCO Spotfire® Server 6.5.x (Released: July 8, 2015)

TSS-13385 - The logging of LDAP connections does not include the exact LDAP server connected to.

TSS-13783 - Runtime exception when simultaneously opening 2 information links using the same MSSQL delegated kerberos data source.

TSS-13906 - TIBCO Spotfire Server uses the hexadecimal values of a certificates DN when using anything else than CN as username.

TSS_6.5.3 HF-007 for TIBCO Spotfire® Server 6.5.x (Released: April 24, 2015)

TSS-12736 - When doing library import using the command line command in exception can occur.

TSS-12964 - After an library import with conflict resolution set to KEEP_NEW, private bookmarks that exist prior to import is not visible if import contains private bookmarks on same analysis.

TS-40693 - Not possible to create inner or outer join in Information Services with join criteria based on more than one column per table.

TSS_6.5.3 HF-006 for TIBCO Spotfire® Server 6.5.x (Released: April 1, 2015)

This hotfix corresponds to Service Pack version 6.5.3, which mainly relates to upgrading the Tomcat version of the TIBCO Spotfire Server. In addition, it also contains a few fixes as listed below. 

If you apply this hotfix, there is no need to install Service Pack version 6.5.3. 

TSS-12667 - Information Links cannot be resaved if Information Link caching is disabled.

TSS-12815 - Information Links may fail for JDBC data sources not supporting the JDBC method Connection.setReadOnly().

TSS-12968 - Information Links based on SAS data sources may fail if more than 10000 values are passed as prompt (or via on-demand).

TSS-12741 - Action logging logs on ERROR- instead of INFO-level in the ordinary server log when the server is shut down.

TSS_6.5.2 HF-005 for TIBCO Spotfire® Server 6.5.x (Released: February 4, 2015)

TSS-12363 - Server error caused by a call to CloseJob for large information links.

TSS-12432 - Moving items in the Library Manager may cause an internal error.

TSS-12404 - During a library import with replace, an error can occur during bookmark merge under certain circumstances, if merge bookmarks is enabled.

TSS-12431 - The command line tool setting the database configuration for action logging encrypts the database password twice, making it impossible to use.

TSS_6.5.2 HF-004 for TIBCO Spotfire® Server 6.5.x (Released: December 15, 2014)

TSS-11629 - Cannot import library content when using the "KEEP_NEW" conflict resolution mode.

TSS-11733 - Unable to retrieve columns of the datatype, "TIMESTAMP WITH LOCAL TIMEZONE", for some combinations of Oracle thin driver and database versions.

TSS-11675 - When importing an item to the library, with setting "replace existing item", and the name matches an existing item, all bookmarks and permissions to the existing item are lost.

TSS-12157 - Importing library content from a server with a different domain name style fails.

TSS-12312 - Redirect fails when redirect procedure information element contains null columns.

TSS_6.5.2 HF-003 for TIBCO Spotfire® Server 6.5.x (Released: October 7, 2014)

This hotfix corresponds to Service Pack version 6.5.2. If you apply this hotfix, there is no need to install Service Pack version 6.5.2. For more information about the Service Pack, please refer to the Release Notes.

TS-37353 - Problem occurring on systems using MS SQL-Server as database backend, when "save as" is used to overwrite an existing library file having bookmarks and the user selects to remove existing bookmarks in the popup dialogue.

TSS_6.5.1 HF-002 for TIBCO Spotfire® Server 6.5.x (Released: September 3, 2014)

This hotfix corresponds to Service Pack version 6.5.1. If you apply this hotfix, there is no need to install Service Pack version 6.5.1. For more information about the Service Pack, please refer to the September 3, 2014 TIBCO Security Advisory for TIBCO Spotfire.

TSS_6.5.0 HF-001 for TIBCO Spotfire® Server 6.5.x (Released: July 4, 2014)

TSS-10954: The MAX aggregation may show null for "Other columns" in Information Link using pivot even though all values are not null.

TSS-11111: User unable to browse library folder if the user does not have browse permissions to the parent folder.